The oval printing machine is equipped with a pneumatic screen frame clamping device during the working process. They only clamp a few sides of the frame. Equipped with an upper positioning pin registration system, this helps to speed up the alignment of the screen plate on the printing machine.
The size of the screen frame determines the area of the screen that the printing machine can accept. If this automatic printing machine does not support the size of the screen frame you are using now and must be changed to a new screen frame, then the waste is very large. Therefore, pay attention to the machine type, and the screen frame must be able to switch freely between sizes.
The cycle speed of an oval printer may be an important factor when purchasing a printer. The maximum cycle speed refers to the output value of the printing machine in one hour when one or two workers are operating. Some printers are capable of printing hundreds of garments per hour, while others are capable of printing more than 1,000 garments. In fact, the actual cycle speed depends on how many flash drying processes you have in your workflow, whether the paste can be made to dry in a very short time, and also on the printing paste, printing area, fabric and other related factors.
The control system of the oval printing machine is very wide, from the analog control panel to the touch screen based system. Each print head has independent control parts for fine-tuning and high-end products. Some types allow the operator to store and recall setpoints for prints, which can drastically reduce set-up time when repeating orders. General printers are also equipped with network-connected solutions that allow manufacturers to access the control system and troubleshoot remotely.
Some basic elements to consider when purchasing an elliptical printing machine: color number and station Active garment printing machine has 24 stations in six colors, and models with 32 stations in 6 colors can be customized. The station of the automatic printing machine is usually 6 more than the number of colors, which is convenient for laying and taking the pieces. Some equipment is specially designed for operation by one operator, and only one additional workstation is installed for laying and taking films. When deciding how many stations you want, be sure to consider the need for flash curing stations.
Pneumatic, electromechanical drives, and servo-mechanical drives are all the more common types of active printer operation. Some printing machines use one type of transmission, while others use a combination of multiple transmission modes. The pneumatic system uses compressed air to make the pressure of the printing machine scraper and ink return knife adjustable, and the solenoid valve can control the speed and movement interval. Printers with strict pneumatic drive systems are usually cheaper than models with electromechanical or servomechanical drives.
